Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 36
  1. #21
    Join Date
    May 2000
    Location
    Beyond The Wall
    Posts
    44,261
    At this time, the TWS is the best system I know to mount a magnifying scope on an AK.

    The AK-200 and the Finnish rifle have similar systems, but have a locking tab in addition. The bad part is they are not aftermarket fittable to a rifle, but like the AK-100 stock, have to be fitted during assembly.
    Gabriel Suarez

    Turning Lambs into Lions Since 1995

    Suarez International USA Headquarters

  2. #22
    Join Date
    Dec 2010
    Posts
    925
    Mine is also installed on a polish milled receiver. After hiring a gorilla, I was able to install it with the leaf spring intact. Again, nothing but boring reliability.

  3. #23
    Join Date
    Dec 2008
    Posts
    371
    Does anyone actually believe that the Founders were sitting around in John Adams' tavern UNARMED because they believed a bar should be a gun free zone?

    Most people who carry do so because it's a hobby.

  4. #24
    Join Date
    Oct 2010
    Posts
    312
    If Gabes crew hasn't broken them, chances are they're pretty durable.

  5. #25
    Join Date
    Dec 2008
    Posts
    371
    Quote Originally Posted by Sturmgewehre View Post
    If Gabes crew hasn't broken them, chances are they're pretty durable.
    Yup...looks like I'm gonna find out.

    Sturmgewehre...what cheek riser do you use? There are many "hack" solutions out there.
    Does anyone actually believe that the Founders were sitting around in John Adams' tavern UNARMED because they believed a bar should be a gun free zone?

    Most people who carry do so because it's a hobby.

  6. #26
    Join Date
    Oct 2010
    Location
    Colorado
    Posts
    1,038
    Quote Originally Posted by 230therapy View Post
    Yup...looks like I'm gonna find out.

    Sturmgewehre...what cheek riser do you use? There are many "hack" solutions out there.
    Magpul ctr or moe and 1/2 or 3/4"
    riser depending on optic height.

    Something like a karsten riser may work on a combloc fixed stock, but I haven't tried that.
    Last edited by SPQR476; 11-06-2011 at 07:38 AM.
    Psalm 144:1 Blessed be the LORD, my rock, who trains my hands for war, and my fingers for battle.

  7. #27
    Join Date
    Dec 2008
    Posts
    371
    Quote Originally Posted by SPQR476 View Post
    Magpul ctr or moe and 1/2 or 3/4"
    riser depending on optic height.

    Something like a karsten riser may work on a combloc fixed stock, but I haven't tried that.
    My rifle has a milled receiver. What do I need to be able to mount the Magpul CTR or MOE? Who makes the adapter?
    Does anyone actually believe that the Founders were sitting around in John Adams' tavern UNARMED because they believed a bar should be a gun free zone?

    Most people who carry do so because it's a hobby.

  8. #28
    Join Date
    Oct 2010
    Posts
    312
    Quote Originally Posted by 230therapy View Post
    Yup...looks like I'm gonna find out.

    Sturmgewehre...what cheek riser do you use? There are many "hack" solutions out there.
    I've found the stock offered by the Mako Group works very well. I have the Galil style hinge stock, which is pricey at $400 a copy, but the utility of the stock is unrivaled. I've yet to find a after market folding stock I like better, especially when using magnified optics. The stock coupled with the TWS rail is unbeatable, IMHO.

    http://www.themakogroup.com/product_p/uas-ak.htm

  9. #29
    New guy here, lurking for a while.

    I have the Dogleg installed on my Yugo. I have had a problem though as my bolt carrier locks/sticks open about every other shot. It only takes a slight nudge for it to slide forward a chamber the next round. I can get it to stick back just by manually cycling the bolt carrier. It does not stick open when manually cycling when the Dogleg is open though. There is no rubbing on the inside of the Dogleg. I have spoke with Nelson multiple times and tried everything he has suggested so far to no avail. Any help would be appreciated...as Nelson said this is the place to go for info and help. I love the system and do not want take it off.

    BTW, Nelson is very helpful and a pleasure to deal with.

  10. #30
    Join Date
    Jun 2007
    Location
    Reno, NV
    Posts
    341
    Are the rails and hammer oiled or greased up? I noticed on my wasr
    That if it's dry the bolt will hang on the hammer

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •