Holosun Offerings?

[ShopMonkey]

Yeah, you're absolutely right. I had to have new holes drilled to make it work. Bothers me that it's not supported on the slide because it has a smaller footprint than the Romeo, and it sits lower which isn't all bad, but it means that I now have a lower 2/5ths cowitness. I've been searching for a P226 slide with front serrations that can actually be cut for an RMR - as you know many of them have that cavity underneath that won't allow a proper slide cut.

at least the weight reduction cuts on the 226 were consistent. the 320's present an entirely new issue because the reduction cuts followed one of 4 different types when we were doing them, there may be more patterns now, but each pattern presents its own special pain in the ass to try to work around

[georgeib]

at least the weight reduction cuts on the 226 were consistent. the 320's present an entirely new issue because the reduction cuts followed one of 4 different types when we were doing them, there may be more patterns now, but each pattern presents its own special pain in the ass to try to work around

Good times...