PDA

View Full Version : Glock PDW 6 in barrel



canonsix
08-10-2016, 03:26 PM
Any of you guys running a 6 inch barrel??? Thoughts ,flame ,etc.Doug

Brent Yamamoto
08-10-2016, 03:46 PM
Yes. 6" KKM 357 Sig barrel in a Glock 35.

Flame? No, but my carry ammo is Underwood which uses flash suppressant. Though I have not noticed flash in any of the training ammo I've used.

My intent with this gun was to create a flat shooting long-range pistol. At first it didn't work well for me, the recoil wasn't bad but the muzzle flip was intense. I simply wasn't getting the accuracy I wanted out of it. I asked Yondering to make me a compensator for it...and that made all the difference. The 115 gr Underwood comes out of there at almost 1700 FPS...which is interesting I suppose but what really matters to me is that it shoots very flat and it hits with a lot of authority even at 100+ yards. It is very accurate; I can basically hit whatever I want with this pistol even without the PDW brace.

It is rather a lot to carry AIWB. I have done so and it's no big deal, but it's not my favorite to wear in a holster. For my purposes it worked out really well turning it into a PDW.

The comp does make it really loud, and depending on your shooting position you will feel the blast (such as on your back, shooting between your knees). I haven't tried removing the comp while shooting with the brace, and will probably leave the comp on there until the tax stamps go through.

49197

DogDoc
08-10-2016, 03:56 PM
Brent, is there any difference between POA and POI at 100 yards?

Brent Yamamoto
08-10-2016, 04:02 PM
I'm sure there is but I haven't measured it on paper. At that distance I've only shot steel.

Last time I was in Prescott, I took aim at a 12"x12" plate (maybe a bit smaller but I don't want to overstate). The farthest I could shoot safely, with students around and such, was 109 yards. I sat against Gabe's truck, braced the pistol against my legs (I didn't have the PDW set up on it at that time). I took aim at the center of the plate. Ding ding ding, three in a row. I couldn't see where it hit, I just know it hit. POI couldn't have shifted more than 6" and I'd bet it was less than that.

canonsix
08-10-2016, 05:52 PM
Thanks ,I had not considered the 357 Sig.I am now.What manner of folding device do you have on your PDW. Doug

michael
08-10-2016, 05:58 PM
That's a great set-up, Brent. I love .357 Sig, it's my EDC in a Glock 32. Would love to put a RDS on it in the future.


Out of destruction rises opportunity. Never, ever give up.

John Chambers
08-10-2016, 06:17 PM
I need one of the 6 inch 357 barrels, let me know. :)

Brent Yamamoto
08-11-2016, 12:06 AM
Thanks ,I had not considered the 357 Sig.I am now.What manner of folding device do you have on your PDW. Doug

That is an MDTAC. More expensive and heavier duty than necessary for this application but I'm an overkill kind of guy. I'm sure with more research a more reasonable but solid option could be found.

G35 6" with comp and folder compared to a G19 and no folder. Both are good set ups and for similar roles, one has more thump at range but the other is lighter and so small.
49202

canonsix
08-11-2016, 06:26 AM
Thank you very much,for the info.Much appreciated.Doug

DutchV
08-11-2016, 07:17 PM
A folder on a Glock PDW, very nice. Might have to try that.

Brent Yamamoto
08-11-2016, 09:19 PM
A folder isn't for everyone but it suits my purpose well.

49209

Bill Bond
08-11-2016, 11:17 PM
How do you get a G19 to fit on an ENDO ?

Yondering
08-12-2016, 12:59 AM
How do you get a G19 to fit on an ENDO ?

It requires drilling a second hole in the Endo for the pin, and grinding some clearance for the magazine. The G19 in Brent's pic is mine, and is a gen4 so it also required whittling down the prong to fit in the smaller grip recess. Not a big deal to do, pretty easy if you have access to a belt grinder.

http://i24.photobucket.com/albums/c26/zthang43/Bang/IMG_2853.jpg

http://i24.photobucket.com/albums/c26/zthang43/Bang/IMG_3437.jpg

http://i24.photobucket.com/albums/c26/zthang43/Bang/IMG_3441.jpg

Scottman
09-21-2016, 05:37 PM
using a 9 inch barrel 9 x 25 dillon

Brent Yamamoto
09-21-2016, 07:30 PM
using a 9 inch barrel 9 x 25 dillon
Pictures!!

C.J. Singleton
09-21-2016, 07:42 PM
using a 9 inch barrel 9 x 25 dillon

Wow now that is something I would love to see a 9x25 carbine was the PCC of my dreams a couple years back

Scottman
09-21-2016, 08:33 PM
25 yards irons and my mediocre skilll

https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/13435532_10209283737672588_5911727197735889137_n.j pg?oh=a88008559a5f82008980ee03a6258781&oe=5873F73A

https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/13423803_10209283769233377_4454902650702373121_n.j pg?oh=d0e7f0e63a5232b1281f9428c18278eb&oe=5879F12C

Scottman
09-21-2016, 08:33 PM
I've taken it to 200 yards with irons

Scottman
09-21-2016, 08:36 PM
50 yards with irons

https://scontent-atl3-1.xx.fbcdn.net/v/t1.0-9/13939521_10209733729162094_6750838067550361189_n.j pg?oh=8f9f6dbb12e4602770522fa369698bc1&oe=583C06BB

DutchV
09-21-2016, 08:40 PM
I think Brent wanted to see the gun. I know I do.

Scottman
09-21-2016, 08:42 PM
Just a standard black glock 20 sf with a 9 inch barrel regular glock iron sights. Nothing fancy right now